OPT-Professional Machine Vision Lighting Provider

Product search:
Your current location: Home > Products > Controller

OPT-APM0524B-2  Mini Voltage Analog Controller


Download

Manual:

OPT-APM0524B-2.zip

Drawing:

OPT-APM0524B-2.PDF

DEMO & SDK

DEMO & SDK.zip


Model No.


Product Features

1. Manual stepless intensity control

2. Compact size

3. Easy to install: screws and DIN rail mounting available.

5. 20 - 24 V DC input

6. Trigger signal input: connect an external signal source (e.g. a camera trigger signal) for synchronized strobing of the illumination device.

Device Overview

No.

Interface

Description

1

Trigger connector

For connection with an external trigger source such as a PLC,

sensor or camera

2

Power output

14 - 24 V DC

3

Indicator

Indicates the power status

4

Potentiometer

Each potentiometer can control 2 Lights

5

Trigger mode

Upper position: ON mode; Lower position: OFF mode

6

Power input

20 - 24 V DC

Connection Steps

Step 1: Turn the intensity adjustment wheels to zero (counterclockwise)

Step 2: Connect the light with the controller; pls. refer to the drawing above.

Step 3: For external triggering, connect the external trigger source with the trigger port.

Step 4: Connect the controller with a 20 - 24 V DC power source and switch the controller on. The indicator is lit.

Step 5: Turn the potentiometer until the intended brightness of the light is reached.

Parameter Description

Item

 Parameter

Instruction

Input voltage

20 - 24 V DC


Output voltage

14.0~24.0V(±0.2V)

the adjustment is stepless

Intensity control

stepless

adjustable by potentiometer

Reverse connection

protection

Yes

To avoid damages due to false connection

External trigger input

For connection with an external trigger source such 

as a PLC, sensor or cameratrigger


Trigger delay time

≤80μs


External trigger

frequency

max.1 kHz


Trigger mode

ON / OFF

NPN trigger is ok

Trigger control

On / Off switch

Pressing the switch to change the mode

between ON and OFF

Output Power

12W/CH 24W/2CH

One channel: max output power 2W

Two channels: max total output power 24W

Standby power

≤3W


Voltage withstand

1000 V AC, max. 1 minute

Leak current <10MA

Insulation resista

500 V DC

Insulation resistance >20 MΩ

Working temp.

-5℃-50℃


Size [mm]

24*63*106


Weight [kg]

0.13



Trigger port and setup

APM05B-2 has two trigger channels, each channel has pins, “+” and “-“.

Please find the details about the the trigger ports for the APM05B below.

                                        

Trigger port and setup

Digital controller has ON and OFF two trigger modes, which can be set inside the controller.

Definition as the chart below, customer can choose the trigger mode according to the application.

TS position

Trigger mode

Description

UP

ON

Tirg+ and Trig- port is disconnected, the light is on;

Trig+ and Trig- port is connected, the light is off.

DOWN

OFF

Tirg+ and Trig- port is disconnected, the light is off;

Trig+ and Trig- port is connected, the light is on.

Sequence diagram

◆ ON mode

When the COM port connect the external signal, 

the lighting is on when "trigger+" and "trigger-" port disconnected (high level trigger), 

the lighting is off when "trigger+“ and "trigger -" is connected (low level trigger).

◆ OFF mode

When the COM port connect the external signal, 

the lighting is off when "trigger+" and "trigger-" port disconnected (high level trigger), 

the lighting is on when "trigger+“ and "trigger -" port disconnected (low level trigger).

Connection Way of Switch and Trigger Port

Dimensions [mm]